Installing Cage Nuts For Attaching Mounting Brackets - H3C S12500X-2L Quick Start Manual

Figure 2-2 Installing slide rails
1
(1) Locating pin
(3) Install cage nuts in the marked square holes
Installing cage nuts for attaching mounting
brackets
Before mounting the chassis in the rack, install cage nuts on the front rack posts for attaching the
mounting brackets by performing the following steps:
1. As shown in
front rack post.
2. Install cage nuts in the marked square holes on the front rack posts. If you have installed
screws in the two uppermost holes, remove them first.
2
1RU
1RU
Figure 2-3, determine the cage nut installation holes and then mark them on the
3
4
(2) Mark the cage nuts installation holes
(4) Use the provided M6 screws to secure a slide rail
to the rack post
2-3