Storage Drives - Supermicro SuperWorkstation SYS-730A-I User Manual

3.7 Storage Drives

The SYS-730A-I supports four internal 3.5" SATA drives installed in a rotating cage. Additional
drives are supported by an optional mobile rack or an optional internal hard drive cage.
Figure 3-6. Rotating the Internal Hard Drive Cage
Rotating the Hard Drive Cage
1. Begin by removing power from the system as described in Section 3.1 and remove the
side cover as described in Section 3.2.
2. Lift the release tab located at the top of the hard drive cage.
3. Rotate the hard drive cage 90 degrees so the drive carriers are facing outward.
Chapter 3: Maintenance and Component Installation
1
3
45
2
2
Release Tab (A)
HDD Cage (B)