Supermicro SuperWorkstation SYS-730A-I User Manual page 55

TPM/Port 80 Header
A Trusted Platform Module (TPM)/Port 80 header is located at JTPM1 to provide TPM support
and Port 80 connection. Use this header to enhance system performance and data security.
Refer to the table below for pin definitions. Please go to the following link for more information
on the TPM: http://www.supermicro.com/manuals/other/TPM.pdf.
Power SMB (I C) Header
2
The Power System Management Bus (I
fan, and system temperatures. Refer to the table below for pin definitions.
4-pin BMC External I
2
A System Management Bus header for BMC is located at JIPMB1. Connect the appropriate
cable here to use the IPMB I
definitions.
Trusted Platform Module Header
Pin Definitions
Pin# Definition Pin#
1 +3.3V 2
3 RESET# 4
5 SPI_CLK 6
7 SPI_MOSI 8
9 +3.3V Stdby 10
C) connector (JPI2C1) monitors the power supply,
2
Power SMB Header
Pin Definitions
Pin# Definition
1 Clock
2 Data
3 PMBUS_Alert
4 Ground
5 +3.3V
C Header
C connection on your system. Refer to the table below for pin
2
External I C Header
2
Pin Definitions
Pin# Definition
1 Data
2 Ground
3 Clock
4 No Connection
55
Chapter 4: Motherboard Connections
Definition
SPI_CS#
SPI_MISO
GND
NC
SPI_IRQ#