Dimm Installation - Supermicro SuperWorkstation SYS-730A-I User Manual

DIMM Installation

1. Insert the desired number of DIMMs into the
memory slots based on the recommended DDR4-
only population table on page 38 or the DDR4 and
PMem table on page 39.
2. Push the release tabs outwards on both ends of
the DIMM slot to unlock it.
3. Align the key of the DIMM module with the receptive point on the memory slot.
4. Align the notches on both ends of the module against the receptive points on the ends
of the slot.
5. Push both ends of the module straight down into the slot until the module snaps into
place.
6. Press the release tabs to the lock positions to secure the DIMM module into the slot.
Chapter 3: Maintenance and Component Installation
Key
Notches
40
LAN/1/2
BMC USB4(3.1)
HEARTBEAT
LEDM1
JUSBA
JNCSI
JLAN1
JPCIE1 JPCIE2 JPCIE3 JPCIE4 JPCIE5 JPCIE6
JA1
COM1
JNVI2C
JNVME2
JIPMB1
LE7
MH17 MH18
JM2_2
BIOS LICENSE
LE4
MAC CODE
X12DAi-N
JM2_1
BAR CODE REV:1.01
DESIGNED IN USA
MH15 MH16
JRK1
JP7
PCH
JL1 JD1
CMOS CLEAR
JBT1
BT1
JNVME1
JSD1 JSD2
CPU1
JUSB31_I1
J37
USB7(3.1)
FANA I-SATA6 I-SATA7 FAN4 FAN3
VGA
USB0/1/2/3(3.0)
JVGA
JAUDIO1
JUSB1
CPU2
JF1
JPI2C1 PWR
LED
FAN2 FAN1