Table of Contents
Advertisement
Installation
Handset Wall Holder
Install Handset Wall Holder
The remote control kit for this fi replace comes complete
with a wall-mounted holder. This holder is not required
in all installations but is provided as an optional feature
for those customers who wish to mount the remote
handset to the wall.
To install the holder to the wall, fi nd a convenient
location and use the hardware provided with the kit.
See the diagram below for required hardware and
confi gurations. Note that the holder can be installed at
the base of a light switch plate.
IMPORTANT. The location of the remote control
handset is important to assure proper temperature
regulation. To obtain a constant temperature, we
recommend that the handset should be between 3
and 15 feet away from the appliance but not directly
above it. We also advise that the handset should be
located away from any other heat source and not in
direct sunlight as this may aff ect the temperature
sensor located in the remote handset.
Alternative 2
Alternative 3
Contents
1 Wall Bracket A
Switch Plate
2 Screws B
1 Screw C
2 Wall Anchor D
1 Spacer E
(detach before
assembly)
1 Wall Bracket F
Alternative 1
35
Advertisement
Table of Contents
