Resetting Alarms - Prosense DPX Series User Manual

7.6 Resetting Alarms:

The DPX Series Gas Control Panel raises audible and visual alarms when detected an alarm
condition. User can stop internal buzzer and external Siren via pressing the MENU button for
5 minutes. If the condition is same panel will again raise the alerts after 5 minutes. User can
initiate reset status via using the panel. This is the last menu option and does not have any
sub-menu. Enter the menu and select "6. Reset" option to execute reset operation:
Panel program will re-scan all channels and detectors and update their current status. It will
display "Successful" message on display and return back to main menu:
If detector status is changed and alarms were cleared panel will update internal status for
them and will not raise alarm again. If the detector status is still same panel will raise alarms
after minutes.
In case of overrange, panel status will not return back without executing the reset operation.
PRS-UM-DP-X-EN-Rev1.0-17.11.2021
1. Detector Settings
2. Relay Settings
3. Configuration
4. Test
5. Information
6. Reset
Successful
45