Setting Up Passwords - Prosense DPX Series User Manual

MODBUS and IP address details will be displayed with preconfigured values.
Panel program will guide user to set each digit one by one. To set current parameter and go
to the next one use MENU button. Once all set and MENU button pressed all values will be
recorded and panel will display "Successful" message to confirm values are recorded.

7.1.2 Setting Up Passwords:

DPX Series Gas Control Panel provides two level security as L1 and L2. Level-1 (L1) security
password is used to enable menu access. Level-2 (L2) security password is used to enable
detector configuration menu. Select "2.Passwords" option from Configuration menu to set
passwords. User must provide L2 password to reach password set screen:
Password set screen will be displayed when correct password provided by user:
Operator password is level-1 (L1) password which can enable menu access.
Programming password is level-2 (L2) password which can enable detector configuration
menu options.
PRS-UM-DP-X-EN-Rev1.0-17.11.2021
MODBUS : 001
IP : 192.168.001.100
MASK : 255.255.255.0
GTWY : 192.168.001.001
DNS : 192.168.001.001
PASSWORD L2
* * * 2
Operator
Programming
:1234
:2222
30