Setting Up Battery; Detector Settings; Analogue Detector Configuration - Prosense DPX Series User Manual

When you select desired language press MENU button. Program will show confirmation
message and work with selected language.

7.1.5 Setting Up Battery:

DPX Series Gas Control Panel can operate with batteries in case of power lost. To enable
battery operation user should set batteries via using Configuration menu option "5. Battery.
Panel program will ask number of batteries:
User should set either
0: operation without battery or
2: operation with battery
Panel will perform battery voltage check following user set number of batteries. If user set
battery operation panel will continue operation in case power lost. If panel is started while
main power lost, user must press the battery operation button to start battery.

7.2 Detector Settings:

DPX Series Gas Control Panel can manage both analogue and Modbus connected detectors.
Their settings are done in different menu steps as their connection mechanism and
management ways are different. User must have L2 security password to perform detector
settings.

7.2.1 Analogue Detector Configuration:

To perform analogue detector settings follow below steps.
1- Press Menu button. The screen will request password to display menu options:
The default password is 1234. It is strongly recommended to change the password after
first login. To change password please see section "Changing Passwords"
PRS-UM-DP-X-EN-Rev1.0-17.11.2021
Num. Battery
PASSWORD
* * * 4
: 0
32