Panel also provides detailed view of each detector. The measurement level will be reported
as alphanumeric value and also in a bar format. Detector will be reported as zone and
channel information if detector is connected to analogue input channel. The example below
shows Z1/CH1 meaning that detector is connected to analogue channel number 1 and
assigned to Zone1.
If detector is connected to Modbus channel it will be reported with D prefix. Below example
shows Z3/D4 meaning that detector having Modbus address 4 is assigned to Zone3.
PRS-UM-DP-X-EN-Rev1.0-17.11.2021
Alarm Cntr. : 2
Z1CH01
LPG
Z2D004
METHANE
Z1/CH1
100
METHANE
0
0V 0C
Z3/D4
100
0
20V 30C
AL3
OVRNG
%LEL
27 MAR 16:58
H2S
PPM
27 MAR 16:58
24