7.1 Panel Configuration:
User can set panel parameters to manage it. Especially user passwords must be changed to
secure the site environment. To adjust panel parameters select "3. Configuration" from main
menu:
A sub-menu will be displayed:
User can adjust network parameters; L1 and L2 passwords, date and time of the panel,
display language of panel and backup battery configuration via using menu options.
7.1.1 Setting Up Network Parameters:
DPX Series Gas Control Panel provides MODBUS and Ethernet connectivity. Panel can
directly connected to a device that can understand MODBUS communication. RS485-3 port
is programmed to provide MODBUS output from panel to a computer or a similar device.
Panel also has RJ45 Ethernet interface to perform Ethernet communication. Select "1.
Network" option from Configuration menu:
PRS-UM-DP-X-EN-Rev1.0-17.11.2021
1. Detector Settings
2. Relay Settings
3. Configuration
4. Test
5. Information
6. Reset
1. Networks
2. Passwords
3. Date and Time
4. Language
5. Battery
1. Networks
2. Passwords
3. Date and Time
4. Language
5. Battery
29