Prosense DPX Series User Manual page 34

5- Select "1.Configuration" to define detector measured gas, measurement range and
measurement unit :
6- Panel program will display details for user to edit according to connected detector
specifications:
The parameters will be blinking on screen to let user set them one by one. The details of the
parameters are given in table YY:
Parameter Details
Channel No Analogue channel that detector connected 0-8
Zone No The zone user want to assign the detector 0-8
Gas Type Measured gas type of the detector
Unit Measurement unit of the detector
Range Measurement range of the detector
Channel No is pointing the analogue channel number that detector is connected. DPX Series
Gas Control Panel can have either 4 or 8 analogue channels. DPX4 model have 4 channels
while DPX8 has 8 analogue channels.
Zone No is a logical definiton that user can group detector depending of the specific
parameters such as location, gas type etc. DPX series panels can have up to 8 zones. If zone
set to 0 , it disables the related detector.
Gas Type is the type of gas that detector can measure. Gas type defined with Prosense gas
coding method. User will set the number and name fo the gas will be updated automatically
by panel. To see list of available gases please check appendix of this manual.
Unit is measurement unit of the detector that can be either %LEL, %VOL, PPM, PPB:
PRS-UM-DP-X-EN-Rev1.0-17.11.2021
1. Configuration
2. Alarm Settings
3. 4-20mA Settings
Channel No : 4
Zone No : 1
Gas Type : 30 LPG
Unit : %LEL
Range : 100
Table 18: Analogue channel definition parameters
Values
30-91
%LEL, %VOL, PPM, PPB
0-10000
34