Group Allow - KTI Networks KGS-2416 User Manual

3-15-7 Group Allow

Function name:
Group Allow
Function description:
The Group Allow function allows the IGMP Snooping to set up the IP multicast
table based on user's specific conditions. IGMP report packets that meet the
items you set up will be joined or formed the multicast group.
Parameter description:
MVID:
The switch supports two kinds of options for managed valid VLAN VID,
including "Client" and "router". Default is "disable". When you choose
"Custom", you can fill in VID number. The valid VID range is 1~4094.
(Start Address to End Address)IP Range:
The switch supports two kinds of options for managed valid IP range; you
can assign
224.0.0.0~239.255.255.255.
Add:
A new entry of
parameters as mentioned above had been setup and then press <Add>
button.
Edit:
The existed entry also can be modified after pressing <Edit> button.
Delete:
Remove the existed entry of allowed group configuration from the allowed group.
Fig. 3-163-3 Group Allow
effective IP range.
configuration can be created after the
allowed group
195
The valid range is