Table of Contents
Advertisement
The Link Layer Discovery Protocol (LLDP) provides a standards-based method for
enabling switches to advertise themselves to adjacent devices and to learn about
adjacent LLDP devices.
3-18-1. LLDP State
Function name:
LLDP State
Function description:
The LLDP state function, you can set per port the LLDP configuration and the
detail parameters, the settings will take effect immediately.
Parameter description:
Tx Interval： To changes the interval between consecutive transmissions of
： The specifies the amount of time the receiving device holds a
Tx Hold
Tx Delay : The specifies the delay between successive LLDP frame
Tx Reinit: The specifies the minimum time an LLDP port waits before
Notification
Interval:
Fig. 3-18-1 LLDP parameter
LLDP advertisements on any given port. (Default: 30 secs)
Link Layer Discovery Protocol (LLDP) packet before discarding
it. (Default: 4 times)
transmissions initiated by value/status changes in the LLDP
local systems MIB. (Default: 2 secs)
reinitializing LLDP transmission. (Default: 2 secs)
A network management application can periodically check the
switch MIB to detect any missed change notification traps.
203
Advertisement
Table of Contents
