Table of Contents
Advertisement
3-10-2. Tag-based Group
Function name:
Tag-based Group Configuration
Function description:
It shows the information of existed Tag-based VLAN Groups, You can also
easily create, edit and delete a Tag-based VLAN group by pressing <Add>,
<Edit> and <Delete> function buttons. User can add a new VLAN group by
inputting a new VLAN name and VLAN ID.
Parameter description:
VLAN Name:
The name defined by administrator is associated with a VLAN group.
Valid letters are A-Z, a-z, 0-9, "
length is 15 characters.
VID:
VLAN identifier. Each tag-based VLAN group has a unique VID. It
appears only in tag-based and Double-tag mode.
SYM-VLAN:
While the SYM-VLAN function of the group is enabled, all packets with
this group VID will be dropped in case they are transmitted from the ports
that do not belong to this group.
Member:
This is used to enable or disable if a port is a member of the new added
VLAN, "Enable" means it is a member of the VLAN. Just tick the check
)
box (
beside the port x to enable it.
-
" and "_" characters. The maximal
Fig. 3-31
Publication date: January, 2006
81
User Manual
Revision A2
Advertisement
Table of Contents
