Events - KTI Networks KGS-2416 User Manual

3-16-1 Events

Function name:
Email Configuration
Function description:
Alarm configuration is used to configure the persons who should receive the
alarm message via either email. It depends on your settings. An email address
has to be set in the web page of alarm configuration (See Fig. 3-61). Then,
user can read the trap information from the email. This function provides 6
email addresses at most. The 24 different trap events will be sent out to SNMP
Manager when trap event occurs. After ticking trap events, you can fill in your
desired email addresses. Then, please click <Apply> button to complete the
alarm configuration. It will take effect in a few seconds.
Fig. 3-164 Trap Events Configuration
198