3-8-3.Access Control List
Function name:
Access Control List
Function description:
The switch ACL function support up to 128 Access Control Entries (ACEs),
using the shared 128 ACEs for ingress classification. You can create an ACE
and assign this ACE for each port with <Any> or assign this ACE for a policy
or assign this ACE for a port. There are 8 policies, each port can select one of
policy, then decides which of the Permit/Deny, Rate Limitation and Port Copy
actions would take according to the ACL configuration packet's IPv4, Ether
Type, ARP Protocol, MAC Parameters and VLAN parameters.
Parameter description:
Ingress Port:
Configurable Range: Any / Policy 1-8 / Port 1-24
Any: Apply this ACE rule for each port ingress classification
Policy 1-8: Apply this ACE rule for specific policy
Port 1-24: Apply this ACE rule for specific port ingress classification
Insert an entry
Edit this entry
Ingress Port
Fig. 3-66
111
Move up this entry
Move down this entry