View Of Sw24Gf; User Interfaces On The Front Panel (Button, Leds And Plugs) - KTI Networks KGS-2416 User Manual

1-4. View of SW24GF

1-4-1. User Interfaces on the Front Panel (Button, LEDs and Plugs)

There are 8 TP Gigabit Ethernet ports and 24 SFP fiber ports for optional
removable modules on the front panel of the switch. LED display area, locating on
the left side of the panel, contains a Power LED, which indicates the power status
and 24 ports working status of the switch. One RS-232 DB-9 interface is offered for
configuration or management.
Power Indication LED
RESET Button:
RESET button is used
to reset the
management system.
• LED Indicators
LED
System LED
POWER
10/100/1000Ethernet TP Port 1 to 8 LED
LINK/ACT
10/100/1000Mbps
1000SX/LX Gigabit Fiber Port 1, 24 LED
SFP(LINK/ACT)
Fig. 1-1 Full View of SW24GF
Gigabit Ethernet Port
Fiber Port Status Indication LEDs
Fig. 1-2 Front View of SW24GF
Color
Green Lit when +5V DC power is on and good
Lit when connection with remote device is good
Green Blinks when any traffic is present
Off when cable connection is not good
Lit green when 1000Mbps speed is active
Green/
Lit ember when 100Mbps speed is active
Amber
Off when 10Mbps speed is active
Lit when connection with the remote device is good
Green Blinks when any traffic is present
Off when module connection is not good
Table1-1
11
Function
RS-232 DB-9 Connector
SFP Fiber Port