Nexcom XPPC 16-101 User Manual page 50

Chapter 3: BIOS Setup
Network Stack Configuration
This section is used to configure the network stack settings.
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
Advanced
Network Stack [Enabled]
Ipv4 PXE Support [Enabled]
Ipv4 HTTP Support [Disabled]
Ipv6 PXE Support [Disabled]
Ipv6 HTTP Support [Disabled]
PXE boot wait time 0
Media detect count 1
Version 2.18.1263. Copyright (C) 2021 American Megatrends, Inc.
Network Stack
Enables or disables UEFI network stack.
Ipv4 PXE Support
Enables or disables IPv4 PXE support. If disabled, the IPv4 boot option will
not be created.
Ipv4 HTTP Support
Enables or disables IPv4 HTTP support.
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
Ipv6 PXE Support
Enables or disables IPv6 PXE support. If disabled, the IPv6 boot option will
not be created.
Ipv6 HTTP Support
Enables or disables IPv6 HTTP support.
Enable/Disable UEFI Network
Stack
PXE boot wait time
Configures the wait time to press the ESC key to abort the PXE boot.
Media detect count
Configures the number of times the media will be checked.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
36
XPPC 16-101 User Manual