Graco PrecisionFlo XL Instructions Manual page 88

PrecisionFlo XL Remote Screen Interface
Operating from a Remote TouchScreen
When the PrecisionFlo XL key switch is turned to run
mode, the screen shown in Fig. 68 appears. Touch the
station number of a configured station to view and
control functions on that station. The button is dark for
an enabled station number. A station is enabled when
it is correctly configured and is communicating properly
with the remote station. If a station button should be
enabled is not, check the network cable connections,
make sure that the station is turned on, and verify that
the physical address has been entered correctly.
Fig. 68
Fig. 69
88 309374
Run Screen Local
Station indicator
When operating with a remote TouchScreen, the run
screens are the same as with an integrated Touch-
Screen except that a small icon at the top of each
screen indicates which local station you are controlling.
Touching this icon returns you to the home screen so
you can navigate to another local station. (See Fig.69).
Return to
Home Screen