Graco PrecisionFlo XL Instructions Manual page 62

PrecisionFlo XL TouchScreen Interface
Setup – Trend Screen
Fig. 40
Table 25—Setup Trend Screen Values
Description
Signals (Select signals to display)
This screen is used to analyze system performance much as you would with an oscilloscope. Select the signal(s) to
monitor and enter the number of seconds to display across the window. Smaller numbers will make the display
scroll faster (valid range is 3 to 120 seconds). The two values at the left edge of the window can be used to change
the range of values displayed. Touch the Start/Stop button to begin trending.
62 309374
Possible Values
Inlet Pressure Regulator 1/Regulator 2
Outlet Pressure Regulator 1/Regulator 2
Desired Pressure Regulator 1/Regulator 2
Requested Flow Regulator 1/Regulator 2
Flow Rate Regulator 1/Regulator 2
Robot Command Flow Reg 1Reg 2
Swirl Speed Regulator 1/Regulator 2
Robot Command Swirl Reg 1/Reg 2
Zero Compensation Reg 1/Reg 2
Peak Compensation Reg 1/Reg 2
Actual Temperature Zone 1/Zone 2/Zone 3/Zone 4