Performing A Firmware Update - IONODES ION-R200 User Manual

12 Performing a Firmware Update

This section describes how to update your ION-R200 to newer firmware versions from the web interface.
1. On the device, switch to configuration view OR navigate to your device's web interface.
2. If not currently logged in, log in using an administrator account's credentials.
3. Click on the Maintenance tab.
4. Click on the Update button. You will be asked for the firmware update file; please select the .iof file
which was provided by IONODES.
5. You will see the following messages indicating the status of the update:
Firmware upload in progress... (100%)
o
Firmware uploaded. Saving to internal storage... (0%)
o
Validating and decompressing firmware... (0%)
o
Firmware ready for installation. Rebooting device... (0%)
o
Web page will disconnect and the device will reboot.
▪
Once the device has rebooted, return to the configuration view. If you are performing
▪
the firmware update remotely, the web interface automatically reconnects.
Testing firmware stability... (##%)
o
Takes 120 seconds.
▪
Firmware update complete. (100%)
o
support@ionodes.com | www.ionodes.com | 450-696-1060
70