Video Configuration Concepts - IONODES ION-R200 User Manual

9.8 Video Configuration Concepts

In the Configuration page, there are multiple tabs for configuring the device. In this section, we will revise
those pertaining to the video aspect of the R200S. Here is a quick overview before we go into details for each
tab.
Data Sources
•
On-Screen Displays
•
Views
•
Video Out
•
Data Sources represent connections to external devices or cameras. Several types of connections are
available: video streams over RTSP, passive RTP and HTTP as well as web pages. The ION-R200 supports up to
32 separate data sources.
On-Screen Displays (OSD) determine the information you want to display over video streams and how to
display that information. For example, when displaying a video stream, you might want to display the camera
name and current time over the video. The ION-R200 supports up to 32 separate OSD configurations.
Views determine how you want to group and display data. For example, if you wanted to display video from
all the building entrances on one screen in a 2x2 layout, you could configure a view to do so. The ION-R200
supports up to 5 separate views.
Finally, Video Outputs contain the configuration specific to each TV or monitor connected to the ION-R200, like
the display resolution for example. The ION-R200 supports up to two display outputs (one HDMI and one Mini
DisplayPort).
support@ionodes.com | www.ionodes.com | 450-696-1060
30