Decoding Priority - IONODES ION-R200 User Manual

39

9.9.5 Decoding Priority

Setting Decoding Priority will determine how your video stream will be displayed upon arrival within the
device.
Low Latency – the video will be displayed upon the very arrival of the first frame received. As the name
implies, this setting will guarantee the lowest latency possible, however, any frame transmission delay could
affect video fluidity.
Balanced – A 100ms buffer is added to the stream. Just the right mix of Low Latency and Video Smoothness
settings, this setting should be sufficient to correct any normally occurring frame timing variations originating
from the data source or which might be network-induced.
Video Smoothness – A 250ms buffer is added to the incoming video stream before it is displayed. Although
this implies a minimal latency, it also ensures an almost perfect video playback.
support@ionodes.com | www.ionodes.com | 450-696-1060