Video Over Http Data Sources - IONODES ION-R200 User Manual

Note: Connection testing is only available for Video over RTSP and Video over HTTP data sources.
Note: For security reasons, any time an invalid URI is configured in a Data Source or loss of a video stream
occurs for any other reason (i.e. camera defect, network issues, etc.) an animated rotating circle icon
will appear to indicate a connection loss for that Data Source as depicted in the bottom right tile of the
graphic on the left above. No connection information, such as IP address or other URI parameters will
be displayed. The graphic on the right shows that you can display this information by activating the
stream details by clicking on the
to the ION-R200.

9.9.3 Video over HTTP Data Sources

To configure an MJPEG over HTTP video connection, set Data Source Type to Video over HTTP. There is no
standardized method to query the list of available HTTP video streams in a camera and thus the discovery
button at the top of the screen when a mouse is directly connected
support@ionodes.com | www.ionodes.com | 450-696-1060
37