Table of Contents
Advertisement
23
The ICT will display as many devices as it discovers on the network.
The ICT displays the current IP address of each detected device. If the device is configured in DHCP mode, its
IP address appears in blue.
If a DHCP server is present on your network, it assigned an IP address to the device during the device's boot-
up sequence.
If no DHCP server was able to assign an IP address to an ION-R200, it will appear in the ICT device list with an
APIPA address (169.254.*.*). If an ION-R200 displays an APIPA address it must be configured with a valid IP
address before it can be used on the network. Select the ''Assign IP address'' from the selection list and apply
the desired TCP/IP settings to the device.
support@ionodes.com | www.ionodes.com | 450-696-1060
Advertisement
Table of Contents
Need help?
Do you have a question about the ION-R200 and is the answer not in the manual?