Powering The Ion-R200 For The First Time - IONODES ION-R200 User Manual

6. HDMI OUT
HDMI 2.0b connector interface for video output to an HD digital display.
7. ETHERNET
ION-R200 Gigabit Ethernet network port. Please use a straight RJ45 (cat. 5 or 6) network cable. Note
that the ION-R200 cannot be powered using Power-over-Ethernet (PoE).
8. 1 x USB 3.2 (top) & 1 x USB 2.0 (bottom)
General purpose USB connector interfaces. These ports can be used to connect an optional keyboard
or mouse.
9. HDMI OUT
HDMI 2.0b connector interface for video output to an HD digital display.
10. USB-C Display Output
Dual Display port 1.4a for video output to an HD digital display.
Note: The ION-R200 has been qualified using 2 monitors on the 2 HDMI ports. Any combination of HDMI and
USB-C display ports is allowed as long as a maximum of 2 monitors are used.

8 Powering the ION-R200 for the first time

Before you can use the ION-R200, you need to connect the following cables:
Display(s): You can connect both displays using the HDMI connectors (recommended) and/or USB-C
•
DisplayPort connector (adaptors not included).
Ethernet network
•
Keyboard and mouse (optional)
•
Power
•
Connecting a keyboard and mouse to the ION-R200 allows you to configure the ION-R200 locally and for this
reason are strongly recommended. If you plan on configuring the device remotely, then the keyboard and
mouse are optional.
support@ionodes.com | www.ionodes.com | 450-696-1060
11