IONODES ION-R200 User Manual page 47

Note: The ION-R200 connects to a web page ONLY when that web page is displayed. Enabling a data
source indicates that the ION-R200 can establish this connection when needed, not that it needs to do
so right away. Disabling a data source prevents the ION-R200 from connecting to the web page for
any reason.
To display the web page, we need to add it to a view. In the Configuration page, select the Views tab. Scroll
down to the View Tiles Content section.
For the top right tile, click on the Data Source field and select our newly configured web page data source.
Click on Save at the bottom to apply the change.
support@ionodes.com | www.ionodes.com | 450-696-1060
47