Table of Contents
Advertisement
Quick Links
Fiber Solution
NetWaySP2P Series
3-Port Ethernet over Fiber PoE+ Hardened Switches
Models Include:
NetWaySP2P
- 1Port Fiber, 2-Port PoE+ Hardened Switch
- Modular plastic case.
NetWaySP2PWPN
- 1Port Fiber, 2-Port PoE+ Hardened Switch
- NEMA4/4X rated outdoor enclosure.
NetWaySP2PWP
- Outdoor 1Port Fiber, 2-Port PoE+ Hardened Switch with Integral Power
- NEMA4/4X rated outdoor enclosure.
NetWaySP2PWPX
- Outdoor 1Port Fiber, 2-Port PoE+ Hardened Switch with Integral Power
- NEMA4/4X rated outdoor enclosure.
- Accommodates up to four (4) 12VDC/4AH batteries.
Installation Guide
DOC#: NetWaySP2P Rev. 101521
Installing Company: _______________ Service Rep. Name: __________________________________
Address: _____________________________________________ Phone #: __________________
More than just power.
TM
Advertisement
Table of Contents
Related Manuals for Altronix NetWay SP2P Series
Summary of Contents for Altronix NetWay SP2P Series
- Page 1 Fiber Solution NetWaySP2P Series 3-Port Ethernet over Fiber PoE+ Hardened Switches Models Include: NetWaySP2P - 1Port Fiber, 2-Port PoE+ Hardened Switch - Modular plastic case. NetWaySP2PWPN - 1Port Fiber, 2-Port PoE+ Hardened Switch - NEMA4/4X rated outdoor enclosure. NetWaySP2PWP - Outdoor 1Port Fiber, 2-Port PoE+ Hardened Switch with Integral Power - NEMA4/4X rated outdoor enclosure.
-
Page 2: Table Of Contents
Features ..............pg. 3 Recommended Altronix Power Sourcing Equipment ....... pg. 3 Installation Instructions . -
Page 3: Overview
Overview: Altronix NetWaySP2P Series 3-Port PoE+ hardened switches convert a single Fiber (1000Base-X/SX/LX) into two (2) Ethernet ports (10/100/1000 Mbps) and provide PoE/PoE+ power to connected devices. Mounted in variety of housing to accommodate different environments, they features auto detection and protection of legacy non-PoE cameras/devices. -
Page 4: Installation Instructions
Installation Instructions: Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction. All units should be installed by a trained service personnel. Installing NetWaySP2P: 1. Mount NetWaySP2P in desired location utilizing the mounting hole (Fig. 1a, pg. 5). Use a proper fastener and/or wall anchor when securing NetWaySP2P with screw through its mounting hole to the surface. -
Page 5: Recommended Altronix Sfp Modules
Recommended Altronix SFP Modules: Altronix P1MM, P1SM10, P1AB2K and P1GCE are hot-pluggable SFP fiber transceiver modules and are readily usable with all Altronix Spectrum fiber optic equipment for 1Gb transmission rates. P1MM For use with Multi-Mode Fiber for distances up to 550m. -
Page 6: Netwaysp2Pwp Configuration
Fig. 3 - NetWaySP2PWP Configuration Brooklyn, NY, U.S.A. www.altronix.com NetWaySP2P 2-Port Media Converter/Injector Input: 48–56VDC Output: IEEE 802.3at (30W) and IEEE 802.3af (15.4W) compliant. Fig. 3a 48-56VDC PoE+ PoE+ Fiber -- Input + Output Output Signal 115VAC 230VAC Ground 115/230VAC... -
Page 7: Netwaysp2Pwpx Configuration
Optional rechargeable Optional rechargeable Optional rechargeable 12VDC/4AH battery 12VDC/4AH battery 12VDC/4AH battery 12VDC/4AH battery To stand-by batteries Brooklyn, NY, U.S.A. www.altronix.com NetWaySP2P 2-Port Media Converter/Injector Input: 48–56VDC Output: IEEE 802.3at (30W) and IEEE 802.3af (15.4W) compliant. Fig. 4a 48-56VDC PoE+... -
Page 8: Typical Application
Typical Application: Fig. 5 Brooklyn, NY, U.S.A. NetWaySP2P www.altronix.com Converts Fiber NetWaySP2P 2-Port Media Converter/Injector to Ethernet & Provides PoE Input: 48–56VDC Output: IEEE 802.3at (30W) and IEEE 802.3af (15.4W) compliant. 48-56VDC PoE+ PoE+ Fiber -- Input + Output Output... -
Page 9: Wall Mount Installation
This installation should be made by qualified service personnel. This product contains no serviceable parts. PMK1 and PMK2 outdoor pole mount kits are designed to simplify the installation of Altronix outdoor rated power supplies and accessories housed in models WP1, WP2, WP3 and WP4 NEMA rated enclosures. PMK1 and PMK2 can be mounted on 2”... -
Page 10: Mechanical Drawing And Dimensions
NetWaySP2PWPN Mechanical Drawing and Dimensions (H x W x D approx.): 9.5” x 7.32” x 4.92” (241.3mm x 185.9mm x 125mm) 1.38” 7.32” (185.9mm) 3.54” (89.9mm) (35.1mm) 316 Stainless Steel Padlock Latch Attached 0.375” (9.5mm) Padlock Eye 6.75” (171.5mm) 6.0” (152.4mm) 4.25”... - Page 11 NetWaySP2PWP Enclosure Drawing and Dimensions (H x W x D approx.): 13.31” x 11.31” x 5.59” (338.1mm x 287.3mm x 142mm) FRONT VIEW RIGHT SIDE VIEW 11.31” (287.3mm) 3.96” (100.6mm) FRONT VIEW COVER REMOVED END VIEW 10.75” (273.1mm) 10.00” (254mm) STAINLESS STEEL PIANO HINGE 8.25”...
- Page 12 WALL MOUNTING HOLE X 4 10-32 X 0.250 BRASS INSERT 4 PLCS. 12.00” (304.8mm) Altronix is not responsible for any typographical errors. –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty...
Need help?
Do you have a question about the NetWay SP2P Series and is the answer not in the manual?
Questions and answers