Altronix NetWay Series Installation Manual

Altronix NetWay Series Installation Manual

Hardened ethernet over fiber poe+ switch with optimized lithium iron phosphate battery charger
Hide thumbs Also See for NetWay Series:

Advertisement

Quick Links

Hardened Ethernet over Fiber PoE+ Switch
with Optimized Lithium Iron Phosphate
Battery Charger
Installation Guide
Models include:
NetWaySP3LWPX
- Includes one (1) Fiber Optic SFP 1G Link,
3-port PoE+ switch and power supply.
- NEMA4/4X, IP66 rated Outdoor enclosure.
- Accommodates one (1) 12V LiFePO 4 battery.
NetWaySP4LWPX
- Includes two (2) Fiber Optic SFP 1G Links,
4-port PoE+ switch and power supply.
- NEMA4/4X, IP66 rated Outdoor enclosure.
- Accommodates one (1) 12V LiFePO 4 battery.
DOC#: NetWaySPLWPX Rev. 103118
NetWay4ELWPX
- Includes one (1) Fiber Optic SFP 1G Link,
4-port PoE+ switch and power supply.
- NEMA4/4X, IP66 rated Outdoor enclosure.
- Accommodates one (1) 12V LiFePO 4 battery.
NetWaySP8LWPX
- Includes two (2) Fiber Optic SFP 1G Links,
8-port PoE+ switch and power supply.
- NEMA4/4X, IP66 rated Outdoor enclosure.
- Accommodates one (1) 12V LiFePO 4 battery.
More than just power.
Embedded
TM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NetWay Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Altronix NetWay Series

  • Page 1 Embedded ™ Hardened Ethernet over Fiber PoE+ Switch with Optimized Lithium Iron Phosphate Battery Charger Installation Guide Models include: NetWaySP3LWPX NetWay4ELWPX - Includes one (1) Fiber Optic SFP 1G Link, - Includes one (1) Fiber Optic SFP 1G Link, 3-port PoE+ switch and power supply. 4-port PoE+ switch and power supply.
  • Page 2: Table Of Contents

    Recommended Altronix SFP Modules . . . . . . . . . . . . . . . . . .
  • Page 3: Overview

    Overview: Altronix Hardened Ethernet over Fiber PoE+ Switches with Optimized Lithium Iron Phosphate Battery Charger provide one (1) or two (2) 1Gb SFP (Fiber) ports, three (3), four (4) or eight (8) PoE (up to 15W) or two (2) PoE+ (up to 30W) ports passing data for PoE/PoE+ compliant devices .
  • Page 4: Enclosure Mounting And Installation

    Enclosure Mounting and Installation: Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction . All units should be installed by a trained service personnel . 1 . Remove backplane from enclosure prior to drilling . Do not discard hardware . Note: Make sure that hardware will not interfere with components of the circuit board .
  • Page 5: Recommended Altronix Sfp Modules

    Fig. 3 Recommended Altronix SFP Modules: Altronix P1MM, P1SM10, P1AB2K and P1GCE are hot-pluggable SFP fiber transceiver modules and are readily usable with all Altronix Spectrum fiber optic equipment for 1Gb transmission rates . P1MM - For use with Multi-Mode Fiber for distances up to 550m .
  • Page 6: Dhcp

    DHCP: A . After selecting DHCP in the IP Address Method field click the button labeled Submit Network Settings . A dialog box will display “New network settings will take effect after the server is rebooted” . Click OK . Next, click on the button labeled Reboot Server .
  • Page 7: Typical Application Drawings

    NetWaySP3LWPX Fig. 5 NetwaySP3B ALOS PORT2 Spd: 10/100/1000 Link PoE: 30W/60W PoE_Data Fiber to Switch IP PoE/PoE+ Altronix Cor PoE_SPR Brooklyn, NY US or Hi-PoE Device www.altronix.com PORT3 (Uplink) Spd: 10/100/1000 Link PoE: 30W IP PoE/PoE+ Device or NetWaySP1A PORT1...
  • Page 8: Netway4Elwpx

    Typical Application: NetWay4ELWPX Fig. 7 NetWay4EB Fiber to Switch Factory Reset PoE/PoE+ PORT 4 or Hi-PoE Device 30W / 60W IP PoE/PoE+ PORT 3 Device Fig. 7a PORT 4 30W 60W PoE/PoE+ PORT 2 or Hi-PoE Device 30W / 60W IP PoE/PoE+ Operation PORT 1...
  • Page 9 Notes: - 9 - NetWaySPLWPX Series...
  • Page 10 Notes: - 10 - NetWaySPLWPX Series...
  • Page 11: Wall Mount Installation

    This installation should be made by qualified service personnel . This product contains no serviceable parts . PMK2 outdoor pole mount kit is designed to simplify the installation of Altronix outdoor rated power supplies and accessories housed in WP2 NEMA rated enclosures . PMK2 can be mounted on 2” to 8” (50 .8mm to 203 .2mm) diameter round or 5”...
  • Page 12: Mechanical Drawings And Dimensions

    Altronix is not responsible for any typographical errors . 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www .altronix .com | e-mail: info@altronix .com | Lifetime Warranty | Made in U .S .A . MEMBER...

This manual is also suitable for:

Netwaysp3lwpxNetwaysp4lwpxNetway4elwpxNetwaysp8lwpx

Table of Contents