Overview: NetWay4ES is a 4-Port PoE/PoE+ switch which is designed for installation at the IDF (Intermediate Distribution Frame) . NetWay4ES allows for system expansion by accommodating up to four (4) IP cameras/devices over a single CAT-5e or higher structured cable . Power up to 60W is provided by NetWay1D midspan injector (included in NetWay4ESK Kit), or 30W by NetWay midspan/endspan, or any IEEE 802 .3at standard midspan/ endspan typically located at the MDF (Main Distribution Frame) .
Technical Specifications: Parameter Description Input Power NetWay1D: 115VAC, 60Hz, 1 .2A or 230VAC, 50/60Hz, 0 .75A . Requirements NetWay4ES: Powered by NetWay1D . Maximum power per port: PoE+ (30W) Output Total maximum power: Dependent on power from midspan or endspan . NetWay1D: Red LED: PoE ON .
Altronix is not responsible for any typographical errors . 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www .altronix .com | e-mail: info@altronix .com | Lifetime Warranty | Made in U .S .A . MEMBER...
Need help?
Do you have a question about the NetWay 4ES and is the answer not in the manual?
Questions and answers