Advertisement
Quick Links
Fiber Solution
NetWay4E1 Series
Hardened PoE Switches
Models Include:
NetWay4E1WP
- 4-port Hardened PoE Switch with
Power Supply/Charger
- NEMA4/4X, IP66 rated Outdoor enclosure.
NetWay4E1WPX
- 4-port Hardened PoE Switch with
Power Supply/Charger
- NEMA4/4X, IP66 rated Outdoor enclosure.
- Accommodates up to four (4)
12VDC/4AH batteries.
NetWay4E1WPN
- 4-port Hardened PoE Switch
- NEMA4/4X rated outdoor enclosure
Installation Guide
DOC#: NetWay4E1 Rev. 050222
Installing Company: _______________ Service Rep. Name: __________________________________
Address: _____________________________________________ Phone #: __________________
NetWay4E1X
- 4-port Hardened PoE Switch with
Power Supply/Charger
- NEMA1 rated Indoor enclosure.
NetWay4E1PL
- 4-port Hardened PoE Switch with
Power Supply/Charger
- Backplane version
NetWay4E1B
- 4-port Hardened PoE Switch
- Board Only
More than just power.
TM
Advertisement
Related Manuals for Altronix NetWay4E1 Series
Summary of Contents for Altronix NetWay4E1 Series
- Page 1 Fiber Solution NetWay4E1 Series Hardened PoE Switches Models Include: NetWay4E1WP NetWay4E1X - 4-port Hardened PoE Switch with - 4-port Hardened PoE Switch with Power Supply/Charger Power Supply/Charger - NEMA4/4X, IP66 rated Outdoor enclosure. - NEMA1 rated Indoor enclosure. NetWay4E1WPX NetWay4E1PL...
- Page 2 Overview: Altronix NetWay4E1 Series Hardened PoE Switches are equipped with one (1) 1Gb SFP port and four (4) PoE IEEE802.3af/3at/ & Hi PoE ports rated at 30W each, limited to total power of the power supply employed. Features: Agency Listings:...
-
Page 3: Installation Instructions
(Fig. 2, pg. 5). 2. Insert SFP module into port marked [SFP], then connect cable to the SFP module on NetWay4E1B to the corresponding input of an SFP switch (Fig. 2, pg. 5). Netway4E1 Series Installation Guide - 3 -... -
Page 4: Technical Specifications
Recommended Altronix SFP Modules: Altronix P1MM, P1SM10, P1AB2K and P1GCE are hot-pluggable SFP fiber transceiver modules and are readily usable with all Altronix Spectrum fiber optic equipment for 1Gb transmission rates. P1MM For use with Multi-Mode Fiber for distances up to 550m. -
Page 5: Typical Applications
Estimated distances are based on starting voltage of 56VDC and accounts for a 10 volt drop. All distances are per IEEE 802.3at standard for device power requirements of minimum 44VDC and leave an approximate 2 volts for safety and flexibility. Netway4E1 Series Installation Guide - 5 -... - Page 6 Cable Guide Input Voltage Selection Switch Fiber to Separate Switch Inlets 115/230VAC IP Device IP Device Input (802.3af / 802.3at) (802.3af / 802.3at) IP Device IP Device (802.3af / 802.3at) (802.3af / 802.3at) - 6 - Netway4E1 Series Installation Guide...
-
Page 7: Wall Mount Installation
This installation should be made by qualified service personnel. This product contains no serviceable parts. PMK1 is intended for use with Altronix outdoor rated power supplies or accessories housed in WP1, WP2, WP3 and WP4 enclosures. Brackets are designed for use with the Wormgear Quick Release Straps (two included). - Page 8 PADLOCK LATCH ATTACHED WITH RIVETS (Ø 0.375” (9.5mm) PADLOCK EYE) 8.00” (203.2mm) Ø 0.32 (8.1mm) MOUNTING HOLE TYP. 4 PLACES 10-32 X 0.375” (9.5mm) BRASS INSERT (X4) 10-32 X 0.25” (6.4mm) BRASS INSERT (X2) - 8 - Netway4E1 Series Installation Guide...
- Page 9 ATTACHED WITH RIVETS. Ø 0.375 PADLOCK EYE 14.54” (369.3mm) 14.00” (355.6mm) SECTION A-A 12.23” (310.6mm) 0.125” (3.2mm) MOUNTING PLATE END VIEW Ø 0.32” (8.1mm) WALL MOUNTING HOLE X 4 10-32 X 0.250 BRASS INSERT 4 PLCS. 12.00” (304.8mm) Netway4E1 Series Installation Guide - 9 -...
- Page 10 (30.5mm) 0.75” 0.75” 12.5” (317.5mm) 1.20” 1.20” (19.1mm) (19.1mm) (30.5mm) (30.5mm) 11.0” (279.4mm) 0.9375” (23.8mm) 1.40” 1.40” (35.6mm) (35.6mm) 0.9375” (23.8mm) 3.25” (82.6mm) 3.25” (82.6mm) 1.0” (25.4mm) 1.0” 1.0” 10.5” (266.7mm) (25.4mm) (25.4mm) - 10 - Netway4E1 Series Installation Guide...
- Page 11 Notes: Netway4E1 Series Installation Guide - 11 -...
- Page 12 Notes: Altronix is not responsible for any typographical errors. –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty IINetway4E1 Series E02V MEMBER - 12 - Netway4E1 Series Installation Guide...
Need help?
Do you have a question about the NetWay4E1 Series and is the answer not in the manual?
Questions and answers