CAUTION
FIG. 3-15 REMOTE PANEL INSTALLED
DO NOT OVERTIGHTEN THE HEX MACHINE SCREWS. OVERTIGHTEN-
ING CAN DEFLECT THE BEZEL SO THAT IT WILL NOT BE WATER
TIGHT AND/OR BREAK OFF THE CORNERS OF THE BEZEL.
Step 11. To mount the electronics to the back plate in the enclosure
you will need to drill a .156 inch tapped or thru hole and use a
6-32 pan head machine screw to fasten the electronics to the
panel. (See Fig. 3-16)
Chapter 3 - Installation
3-11