Avaya CU360 Manual page 48

© 2021 Avaya Inc. All rights reserved
-
Please note that if you change the name inside the CU360 App, it will be applied again also to the
Wi-Fi Direct device name.
Connect to Wi-Fi Display (Miracast) from Windows 10 PC
To connect a Windows PC supporting Wi-Fi Display to your CU360, do the f ollowing
-
-
-
-
-
-
•
Wi-Fi Display (Miracast) from Android Phone/Tablet
To connect Android Phone/Tablet supporting Wi-Fi Display to your CU360, do the f ollowing.
-
Figure 81: Smart View is the name of the feature on some mobile devices (i.e. Samsung)
-
Figure 82: Chose the CU360 device to connect to
•
•
•
Release Notes for Avaya Collaboration Unit CU360
Select Rename device
Warning
•
If you launch the Wi-Fi Display app while CU360 App is in a call, and the CU360
device is connected to the network using Wi-Fi, you could experience some video
quality degradation in the call while you wait f or the PC or the mobile/tablet to
connect.
•
It is suggested to connect the PC or mobile/tablet bef ore placing a call, or use an
Ethernet cable to connect your CU360 Device to the network
Launch the CU360 Wi-Fi Display app as explained in the "CU360 as Wi-Fi Display"
section.
On your Windows PC, click on the Notif ication Icon present on the Tray Bar, and select
"Connect"
Check if Miracast is supported
If it is supported, click on your CU360 Name (as a Display)
Once connected, the Windows PC will see your CU360 device as and additional monitor
(second, third...) at 1080p@30f ps, where to extend or duplicate the PC desktop.
Using the "Project" tab on the PC, you can change PC the desktop projection mode:
Duplicate, Extend, ...
o
Important
Controlling the PC with CU's mouse/keyboard is not supported.
Activate the Wi-Fi f eatures in your mobile device
o
Feature name can change: Smart View, Screen Mirror, Cast, Miracast
Select the CU to connect to, as Mirror Screen or Display
o
The phone/tablet will send audio and video to CU
o
Sent content will be centered in the Wi-Fi Display app, keeping aspect ratio of the
source device.
o
Splitting the CU360 screen or rotating the source (active screen) will recalculate
content placement.
Important
You can control some source Android device with a mouse connected to your CU.
A keyboard connected with the CU can be used with some Android source devices .
DRM Protected video content cannot be sent f rom mobile to CU360.
The CU360 Video-collaboration Application 48