The EnGenius Industrial Cordless Phone System offers private, Intercom/ 2-way radio calls
independent of the base station. Intercom/ 2-way communication can be placed from handset to
handset.
Handset to Handset Calls
1. Press Intercom key followed by a two-digit handset ID or
Group ID.
2. Press END key to end the call.
Notes:
1.
Intercom calls can be made regardless if the Base Station is
present.
2.
If a Group ID is entered, the first handset (belonging to that
group) that answers will establish a link with the caller. See
Handset Group Subscription.
3.
If a link cannot be established, the LCD shows "No
Connection" after a 12-second time out.
Making a Broadcast
1. Broadcasting all handsets
a. Press
BROADCAST
b. Hear bi-bi-beep while the initiating handset broadcast all
handsets within communication coverage
c. Start to speak the message to be broadcasted once you
hear the "beep" sound; the speakerphone of destination
handsets will be opened up
d. Release
BROADCAST
2. Broadcasting a group of handsets
a. Enter the Group ID and then press
b. Hear bi-bi-beep while the initiating handset broadcast all
handsets within communication coverage
c. Start to speak the message to be broadcasted once you
hear the "beep" sound; the speakerphone of destination
handsets will be opened up
d. Release
BROADCAST
3. Broadcasting an individual handset
a. Enter the Handset ID and then press
b. Hear bi-bi-beep while the initiating handset broadcast all
handsets within communication coverage
c. Start to speak the message to be broadcasted once you
hear the "beep" sound; the speakerphone of destination
handsets will be opened up
d. Release
BROADCAST
Notes:
1.
You need to continuously press BROADCAST key when doing broadcast. The
broadcast will be over once user release the key.
2.
You need to notice that there is no bi-bi-beep sound when receiving a broadcast.
key from one handset
key to end the broadcasting
BROADCAST
key to end the broadcasting
BROADCAST
key to end the broadcasting
key
key