Basic Operations; Operation Modes; Base Operation Modes; Handset Operation Modes - EnGenius DuraFon 4X Manual

Basic Operations

Operation Modes

Both the base station and handset have levels of operation at which time only certain procedures
of functions can be performed.
A. Base Operation Modes
1. IDLE mode- this is the default mode. The intercom, broadcast, and
volume keys are active in IDLE mode.
2. TALK mode- the base operates in this mode during phone call,
intercom, and broadcast operation. The "In Use", "Intercom", and
"Broadcast" LED will light up respectively.
3. REGISTRATION mode- the base enters this mode by pressing the
REG button for three seconds. There are no active base unit keys once
this mode has been entered. Four LEDs will light up in Registration
mode.
B. Handset Operation Modes
1. IDLE mode- this is the default mode.
a. If there is no on-going activity, the handset automatically
goes into SLEEP/IDLE mode to save battery power.
b. The handset can be turned off completely by holding
down the END key for 3 seconds.
c. The idle screen display (custom name) can be edited.
d. The 2-digit number represents the handset ID.
2. Menu mode
a. Press the Right soft function key to activate MENU mode.
b. In MENU mode, the handset settings and information
contained in memory can be changed.
c. The functions available through the MENU selection are
covered in greater detail from page 50.
d. The MENU structure display as below: