Handset Features; Basic Handset Features - EnGenius DuraFon 4X Manual

Handset Features

Basic Handset Features

1. 4-line LCD (Liquid Crystal Display)
a. The LCD display has LED (Light Emitting Diode) for
backlighting.
st
b. The 1 line of LCD consists of icons.
c. Icons explanation from left to right
(1) RSSI (Receive Signal Strength
Indicator)
During a call, the number of bars is
proportional to the radio signal
strength received.
(2) Call in-progress (ON/OFF-Hook)
Indicates if phone line mode is
active
(3) Intercom in-progress
Indicates if Intercom mode is active
(4) Handset ID
Displays a handset icon and a 2-digit Handset ID
(5) Two-Digit Address Index
Shows address index when viewing contents of the call logs.
(6) Line Indicator
Indicates the number of the line being accessed by the
handset.
(7) Battery Strength
Number of bars is proportional to the amount of battery
time remaining.
Indicates charging when in charger cradle.
nd rd
d. The 2 and 3
each, display status, message, menu selections, or user-
editable alphanumerical characters.
e The last line displays the left and right soft keys.
2. Ringer
a. Rings to an incoming call.
b. Distinctive alert sounds indicating various events:
(1) Single Beep: successful key entry
(2) Double beep: failed operation or invalid key entry, also
indicates power on/off
(3) Periodic 1-Long-2-Short Beep (every 1 minute): low battery
warning
(4) Periodic Long Series of Beeps (repeat every 30 seconds):
indicates a call is on-hold
3. TALK/FLASH
a. Places or answers a telephone or intercom call
b. Sends a Flash signal to phone line to retrieve a dial tone
after the call ends, or to perform the call waiting feature
provided by local phone companies during a call.
4. 2-WAY/INTERCOM
a. Places an intercom call to another handset ID or a group
lines of the LCD, maximum 14 characters