Making A Telephone Call; Making A 2-Way/ Intercom Call - EnGenius DuraFon 4X Manual

Making a Telephone Call

1. Press TALK, wait for dial tone, and then enter phone number.
2. Alternatively, you can enter phone number first then press TALK key.
When using this method, you can use the
(Right) soft keys to edit the number entered. "Delete" erases the last
digit entered. "Clear" erases the entire line but remains in the dialing
mode.
3. Speed dial by access the entries in the phone book
a. Press or scrolling key to enter the phone book
b. Press TALK to dial the number.
4. To abort dialing, press END key.
Notes:
1.
2.
3.
4.

Making a 2-Way/ Intercom Call

Main menu
1.KeyGuard
2.PhoneBook
3.Call Logs
4.Sound
5.Settings
6.Registration
7.Text Message
8.Unused
9.Admin
CLEAR
After a link established, the Base ID will appear on the upper-
right corner. If no Base ID show up, it applied that you are
approaching the boundary of the coverage.
If the line is occupied, the LCD shows "No Line Available"
and handset returns to standby mode.
If a link cannot be established, the LCD will show "No Base"
after a 12-second time out.
A call duration timer will start displaying the length of the call
after link is established.
Sub-menu
1.Dialed
2.Received
3.Missed
1.Ring Volume
2.Ring Tone
3.Key Volume
4.Key Tone
1.Dial Prefix
2.Group Select
3.Forwarding
4.Clear
5.Naming
6.Contrast
7.Backlight
8.Line Select
9.PBX Options
0.Language
Not Applicable
1.Auto Attndnt
2.System
(Left) and DELETE