EnGenius DuraFon 4X Manual page 38

d. The two-digit index on the upper right corner of the LCD display shows the location in
ascending order, with 01 being the most recent call.
e. While viewing any of the three call logs, press
number.
Notes:
1. Only phone numbers are stored in the three call logs.
Intercom calls are not recorded.
2. Caller ID service is required from your local phone company in
order to receive phone numbers, names and time stamps on
incoming calls. The Received and Missed Call Logs will
register no incoming calls if Caller ID service is not available.
5. Press "4" to set sound-related settings:
a. Press "1" to select ringer volume:
High-then-Vibrate, and High. Press
High.
b. Press "2" to select ringer tone:
SAVE (Left) soft key to save selection. Default = 0.
c. Press "3" to select key volume when a key is pressed:
options: High, Low, and Off. Press
Low.
d. Press "4" to select key tone:
SAVE (Left) soft key to save selection. Default = 0.
6. Press "5" to change handset settings:
a. Press "1" to set dialing prefix:
i.
Use or
Off.
ii. If "On" is selected, the handset is prompted to enter a prefix, up to 14 digits.
iii. Use "Delete" (Right) soft key and
iv. When this feature is turned on, the LCD will prompt the user on each outgoing phone
call except during redial or dialing by pressing the TALK key first whether to use the
dialing prefix. The current prefix is also displayed. Press "Yes" (Left) or "No" (Right)
soft key to add the prefix to the beginning of the number.
v. This feature is useful for access code, calling card, and credit card calls, etc.
b. Press "2" to Group Select: see Handset Group Subscription.
c. Press "3" to set or turn Call Forwarding on or off. Default = Off. See Call Forwarding.
d. Press "4" to clear call logs and phonebook:
i. Press '1" and confirm to delete the entire phonebook.
ii. Press "2" and confirm to clear the three call logs (Called, Received, and Missed).
e. Press "5" to change the power-up LCD display to show, e.g., customer name or other
greeting message:
i.
Use or
or delete (the character above the cursor, or left of the cursor if cursor is on the right
of the last character).
ii. Enter characters using the Character Table and method discussed in the Phonebook
section.
iii. When finished, press
f. Press "6" to change LCD display contrast:
i.
Use or
Default = 10.
ii. Press SAVE
g. Press "7" to change the LCD backlight:
Use
SAVE
Use
SAVE
Use or
to scroll and select to turn on or off the dialing prefix feature. Default =
to move the cursor backward or forward to insert (to the left of the cursor)
SAVE (Left) soft key to save change.
to scroll through values 1 to 16. Pick one that is most suitable to you.
(Left) soft key to save setting.
DIAL (Left) soft key to dial the phone
scroll through 5 options: Low, Vibrate, Off,
or to
(Left) soft key to save selection. Default =
scroll through 4 options: 0, 1, 2, and 3. Press
or to
Use
(Left) soft key to save selection. Default =
scroll through 4 options: 0, 1, 2, and 3. Press
to
to edit prefix.
or
scroll through 3
or to