Making A Telephone Call; Making An 2-Way/ Intercom Call; Making A Broadcast; Handset To Handset Calls - EnGenius SN933 User Manual

Making a Telephone Call

1. Press
, wait for dial tone, and then enter phone
number.
2. Alternatively, you can enter phone number first then press
key.
When using this method, you can use the
DELETE (Right) soft keys to edit the number entered.
"Delete" erases the last digit entered. "Clear" erases the
entire line but remains in the dial-and send dialing.
3. Speed dial by accessing the entries in the phone book
(Menu 2)
a. Press
or scrolling key to enter the phone book
b. Press
to dial out the number
4. To abort dialing, press
key.
Notes:
1. If a link cannot be established, the LCD will show "Base not
found" after a 6-second time out.
2. A call duration timer will start displaying the length of the call
after link is established.

Making an 2-Way/ Intercom Call

The SN933 Cordless Phone System offers private, Intercom/ 2-way radio calls
independent of base station. Intercom/ 2-way communication can be placed
between handsets.
CLEAR (Left) and
~29~
1. Press
key followed by a two-digit handset ID or
Group ID.
2. Press
key to end the call.
Notes:
1. Intercom calls can be made regardless if the Base Station is
present.
2. If a Group ID is entered, the first handset (belonging to that
group) that answers will establish a link with the caller. See
Handset Group Subscription.
3. If a link cannot be established, the LCD shows "Paging timeout"
after a 35-second time out.

Making a Broadcast

A. Handset to Handset Calls
1. Broadcasting all handsets
a. Press and hold
key (left top corner of keys) from
one handset.
b. Hear a long "Du..." sound while the initiating handset
broadcasts to all handsets within communication
coverage.
c. Speak the message to be broadcasted once you hear the "Du Du" sound; the
speakerphone of destination handsets will open if it receives a voice.
Re: Pressing and holding the
broadcast.
d. Release
key to end the broadcasting.
2. Broadcasting to only a group of handsets
a. Enter the Group ID and then press and hold
(left top corner of keys). See page 37 for instructions on
creating groups
b. Hear a long "Du..." sound while the initiating handset
broadcasting to all handsets.
c. Start to speak the message to be broadcasted once you hear the "Du Du"
sound; the speakerphone of destination handsets will open if it receives a
voice.
Re: the initiating handset press and hold the
key is needed during the speaking of the
key
key is needed during the
~30~