Making An 2-Way/ Intercom Call; Handset To Handset Calls; Intercom/2-Way From Base To Handset; Intercom/2-Way From Handset To Base - EnGenius EP801 User Manual

Making an 2-Way/ Intercom Call

The EP801 Cordless Phone System offers private, Intercom/ 2-way radio
calls independence of base station. Intercom/ 2-way communication can be
placed from or to base stations and handsets.
A. Handset to Handset Calls
1. Press
key followed by a two-digit handset ID or
Group ID.
2. Press
key to end the call.
Notes:
1. Intercom calls can be made regardless if the Base Station is
present.
2. If a Group ID is entered, the first handset (belonging to that
group) that answers will establish a link with the caller. See
Handset Group Subscription.
3. If a link cannot be established, the LCD shows "No
Connection" after a 12-second time out.
B. Intercom/2-Way from Base to Handset
1. Press
key on the base station to intercom all registered
handsets. The first handset to answer will establish a voice link with the
base.
2. Or press a two-digit handset ID/group ID followed by
intercom the designated handset/ group.
3. The INTERCOM LED will flash until a handset responds.
4. The base unit will page for 30 seconds, then terminate the page if no
handset responds.
5. Before a handset answers, the INTERCOM can only be cancelled from
the base by pressing again. However, once a handset answers,
the base and the answering handset both can end the call.
key to
~27~
C. Intercom/2-Way from Handset to Base
1. Press
key followed by the left softkey
2. The base will ring, until press the
the intercom call with the handset.

Making a Broadcast

A. Handset to Handset Calls
1. Broadcasting all handsets
a. Press key (left side of handset) from one
handset.
b. Hear bi-bi-beep while the initiating handset
broadcast to all handsets within communication
coverage.
c. Start to speak the message to be broadcasted once you hear the
"beep" sound; the speakerphone of destination handsets will be
opened up.
d. Press
key to end the broadcasting.
2. Broadcasting a group of handsets
a. Enter the Group ID and then press
side of handset).
b. Hear bi-bi-beep while the initiating handset
broadcast all handsets within communication
coverage.
c. Start to speak the message to be broadcasted once you hear the
"beep" sound; the speakerphone of destination handsets will be
opened up.
d. Press
key to end the broadcasting.
3. Broadcasting an individual handset
a. Enter the Handset ID and then press
side of handset).
b. Hear bi-bi-beep while the initiating handset
broadcast all handsets within communication
coverage.
c. Start to speak the message to be broadcasted once you hear the
"beep" sound; the speakerphone of destination handsets will be
opened up.
--BASE
key to connect
key (left
key (left
~28~