Change System Settings By Administrator; Phonebook Operations - EnGenius DuraFon 4X Manual

3. If set to On, when pressing TALK or entering a phone number followed by pressing TALK
key, the handset LCD display will show "Select Line" followed by available lines (1-4).
Select from one of the available lines i.e. press "1" to select line 1 and press "2" to select
line 2.
4. This feature is also supported when selecting a second line during call conferencing.

Change System Settings by Administrator

1. In addition to AA settings, there are two system parameters that can be changed by the
administrator: clear (de-register) handset ID and set the next handset ID to be assigned by
the base.
2. From an administrator handset (Handset 10 or 11), press Menu (Right) soft key.
3. Press number "9", this will enter administration menu.
4. Press number "2", handset enters System setting menu.
a. Clear Handset ID:
Press "1" and enter a two-digit Handset ID when prompted to clear this ID for later
assignment.
b. Set next Handset ID to be assigned:
Press "2" and enter a two-digit Handset ID when prompted. This is the ID that will be
given out by the base to the next handset registering with the base.
c. Dial tone:
Press "3" to set up the dial tone to be either "Tone" or "Pulse." Press "1" to choose "Tone"
or press "2" to choose "Pulse."
d. Flash time:
Press "4" to set up the flash time from 100ms, 200ms, to 900 ms (9 levels to choose
from.) For example, press "2" if the desired flash time is 200ms.
e. Line detect:
Press "5" to set up the line detect to be either "On" or "Off." Press "1" to choose "On" or
press "2" to choose "Off."
Notes:
1. De-registration by the administrator will disable a handset's
ability to use the base station to make or receive phone calls.
This also frees up the ID for future registration.
2. Handsets de-registered by the administrator can still perform
intercom to other handsets.

Phonebook Operations

1. You can store up to 30 entries in the phonebook. Each entry
can contain a phone number or handset ID (up to 28 digits)
and a name (up to14 characters).
2. To access phonebook, press menu follow by "2" or
scrolling key when handset in standby mode.
3. To add a new entry:
a. Press ADD soft key.
b. Enter a phone number when LCD prompts "Number?"
Use DELETE soft key to delete the last digit entered.
Press SAVE when completed.
or