Base Illustration - EnGenius DuraFon 4X Manual

16. Call Timer
a. Display call time duration for current call during and
immediately after the call
17. Text Messaging:
a. Editing Message: from a handset, users can edit the short
text message for up to 50 characters. Up to 5 messages
can be edited and stored.
b. Sending Message: In view mode, handset can send a
message to another handset or a group of handsets.
c. Incoming Message: A distinctive tone alerts an incoming
message. The message will stay on LCD display for 8
seconds and then is saved in memory. A total of 5
incoming messages can be saved.
18. Call Transfer
a. Direct Transfer: transfer a telephone call to another
handset without announcement.
b. Announced Transfer: speak to the destination handset
before transferring a telephone call.
19. Call Forwarding
a. Forward all incoming phone calls to another handset.
b. Forward all incoming phone calls to another landline or
cellular phone number.
[Note]
(1) Once enabled from the handset, all phone calls will be
routed to the designated number until disabled. A
warning message will appear on the LCD.
(2) Intercom calls are not forwarded.
(3) Before setting this feature, please check your PBX
system if it can send a reverse signal to hang up the line.
20. Call Conferencing
a. 2-handset and 1-line conferencing.
b. 1-handset and 2-line conferencing.
21. Line Selection
a. When enabled from the handset menu, a handset user will
be prompted to select from a list of available lines before
making an outgoing call.

Base Illustration

Base Features
L4 L3
5. Line in
AUDIO
L2 L1 DC IN
2. Audio in 6. DC in