Call Forwarding - EnGenius DuraFon 4X Manual

c. Two handsets and one phone line can now talk
simultaneously. Any one party can drop out of the 3-
way conferencing, leaving the remaining two parties still
in conversation.
5. 3-Way Conferencing with a Second Phone Line:
a. Press number "1" and enter a phone number to call
another phone line.
b. After the second line answers, press the
soft key.
c. One handset and two phone lines can now talk
simultaneously.
I. If one phone line hangs up, the handset continues
talking to the remaining phone line.
II. If the handset presses END key, the 2nd phone
line will be dropped. The handset and the first
phone line continue conversation.
Notes:
1. 3-way conferencing between 3 handsets is not supported.
2. Unlike 3-way conferencing provided by the phone company, 3-way conferencing involving 2
phone lines will take up two physical lines, leaving only two lines left available for other
handsets. The handset must have access to a second line.

Call Forwarding

1. A handset can direct the base station to forward all future
phone calls to be routed to another handset or another
phone number.
2. Press handset MENU
3. Press the number "5", this will enter the handset setting
menu.
4. Press number "3", handset enters call forwarding setting
mode.
5 Use Up/Down arrow to scroll up and down the selection
(Off, Another Handset, External Line).
6. Make a selection (default = Off) and press
key.
7. When prompted, enter a two-digit handset ID or an external
phone number, up to 14 digits.
8. A warning message "All calls are forwarded" will appear on
the handset LCD.
9. To turn off call forwarding, repeat the above procedures and
select "Off".
Notes:
1. Because this setting is stored both on the handset and on the base station, the handset must
be in range with the base to change setting.
2. A warning message will appear on the handset LCD to inform the handset that all calls are
forwarded.
3. Calls can be forwarded to another handset or a phone number, but not both. Setting a call
forwarding address will automatically replace the previous setting.
4. There is no call forwarding announcement, the caller is not aware of the call is being
forwarded.
(Right) soft key.
SAVE
CONF (Left)
(Left) soft