Charger Features - EnGenius DuraFon 4X Manual

Charger Features

1. DC In
Connects to Charger AC Adaptor.
2. Handset Charging Slot
a. Charge handset battery when handset is placed in cradle.
b. Refer to the handset LCD for charging status
(1) Charging: LCD screen showed "Charging"
(2) Fully Charged: battery status bar stands still and the LCD
screen would display "Fully Charged"
(3) Charge Fail: Should there be any error occurred during
charging mode, the LCD screen would display "Charge Fail"
3. Spare Battery Charging Slot
a. Charge spare battery when battery is placed in slot.
b. LED as the spare battery charging indicator
(1) Slot is empty and the power is on: LED is Green light
(2) Charging: LED is Orange light
(3) Fully Charged: LED returns to Green light
4. It is impossible to overcharge the battery using this charger.
5. The adaptor for charging station can be used as travel charger
as well. However, you can not turn off the power while
charging with the travel charger. A Warning message: "Unplug
Travel Charger than OFF the power" will be shown on the
LCD display.
Notes:
I.
II.
III.
IV.
Fully charge battery packs before first use.
Both handset and spare batteries can be charged at the same
time.
Handset will be "power on" automatically when placing on the
charging slot.
However, if you run drain the battery, it would take around one
minute for handset to auto power on.