Handset And Charger Installation - EnGenius DuraFon 4X Manual

company automatically finds a free line. In a hunt group, the
Call Waiting and the Caller ID with Call Waiting (or called Type
II Caller ID) features are unnecessary because a 2
come in on a separate line, rather than on the same line. For
a 2
built-in Call Waiting feature will alert the user and allow the
user to toggle between 2 lines.

Handset and Charger Installation

1. Plug the transformer end of the Charger AC/DC adaptor into a standard
AC electric power outlet, plug the other end into the "DC In" jack on the
back of the Charger.
2. Install battery pack onto the handset.
3. Install handset antenna.
4. Place handset onto the charger front slot.
5. The phone system is now ready to perform basic functions such as
making and receiving phone calls and intercom calls. No base station or
handset programming is needed for basic operations.
6. Charging cradle may be wall mounted, but an "L" bracket should be
used for support under the cradle to avoid breaking mounting slots. An
"L" bracket is not included, but can be purchased from a local home
center.
Note:
1.
2.
nd
call coming in on a separate line, the phone system's
The handset packaged along with a Base Station is pre-
registered at the factory. If you have a new handset, you will
need to register the handset with the base station in order to be
recognized as a member handset by the base and by other
handsets. See Handset Registration.
Fully charge battery packs before the first usage.
nd
call will