Making A Telephone Call; Making An 2-Way/ Intercom Call; Making A Broadcast; Handset To Handset Calls - EnGenius EP802 User Manual

Making a Telephone Call

1.
Press , wait for dial tone, and then enter phone
number.
2. Alternatively, you can enter phone number first then
press key.
When using this method, you can use the
(Left) and DELETE (Right) soft keys to edit the number
entered. "Delete" erases the last digit entered. "Clear"
erases the entire line but remains in the dial-and send
dialing.
3. Speed dial by access the entries in the phone book
(Menu 2)
a. Press
or scrolling key to enter the phone
book
b.
Press to dial out the number
4.
To abort dialing, press key.
Notes:
1.
If a link cannot be established, the LCD will show "Base not
found" after a 6-second time out.
2.
A call duration timer will start displaying the length of the call
after link is established.

Making an 2-Way/ Intercom Call

The EP802 Cordless Phone System offers private, Intercom/ 2-way radio
calls independence of base station. Intercom/ 2-way communication can be
placedbetween handsets.
CLEAR
~29~
1. Press
key followed by a two-digit handset ID or
Group ID.
2. Press
key to end the call.
Notes:
1. Intercom calls can be made regardless if the Base Station is
present.
2. If a Group ID is entered, the first handset (belonging to that
group) that answers will establish a link with the caller. See
Handset Group Subscription.
3. If a link cannot be established, the LCD shows "Paging
timeout" after a 35-second time out.

Making a Broadcast

A. Handset to Handset Calls
1. Broadcasting all handsets
a. Press and hold
key (left top corner of keys)
from one handset.
b. Hear a long "Du..." sound while the initiating
handset broadcasting to all handsets within
communication coverage.
c. Start to speak the message to be broadcasted once you hear the "Du
Du" sound; the speakerphone of destination handsets will be opened
up. if it received the voice.
Re: the initiating handset press and hold the
during the speaking or broadcasting.
d. Release
key to end the broadcasting.
2. Broadcasting a group of handsets
a. Enter the Group ID and then press and hold
key (left top corner of keys).
b. Hear a long "Du..." sound while the initiating
handset broadcasting to all handsets.
c. Start to speak the message to be broadcasted once you hear the "Du
Du" sound; the speakerphone of destination handsets will be opened
up. if it received the voice.
Re: the initiating handset press and hold the
during the speaking or broadcasting.
key is needed
key is needed
~30~