Table of Contents
Advertisement
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
General
The Quick Start Installation Guide provides you with the necessary installation procedures
to get the LXL-1010 mounted and operational. The sections that follow provide detailed
information designed to further enhance or modify the LXL-1010 standard defaulted
operational functions.
1. Removing the Cover
During normal operation, the cover of the LXL-1010 control remains in place.
Press inward on the two locking tabs shown in Figure 1 and remove the cover.
Referring to Figure 2, install the battery and battery bracket as shown and then connect the
battery connector to the pc board. Observe installing the battery with the polarization
orientation as shown in Figure 2.
www.PDF-Zoo.com
Quick Start Installation Guide
Q u i k M a t
e
R
Figure 1. LXL-1010 Cover Locking Tabs
Figure 2. Battery Installation
firealarmresources.com
S E C T I O N
COVER
LOCKING
TAB
(TYPICAL L/R)
QM-023-V0
2
2–1
Advertisement
Table of Contents
