Quick Guide To Basic System Functions - Honeywell ADEMCO Vista-12 Series User Manual

Fire Alarm System (If Installed - cont'd)
Using the Panic Key(s)
Assigned for FIRE
Emergency

Quick Guide to Basic System Functions

Quick Guide to Basic System Functions
Quick Guide to Basic System Functions Quick Guide to Basic System Functions
FUNCTION
Check Zones
Arm System
Quick Arm
(if programmed)
Bypass Zone(s)
Quick Bypass
(if programmed)
Silence Sounders
Burglary:
Fire:
"Check":
Disarm System
Clear Alarm Memory
A key or key pair may have been assigned for manually initiating a FIRE alarm. See
the Panic Keys section for key assignments.
For convenience, indicate the key or key pair assigned for fire below.
I n d i v i d u a l K e y s
A B C
Press the individual key assigned for fire for 2 seconds.
O R
K e y P a i r s
1 O F F
∗ R E A D Y and
3 S T A Y
PROCEDURE
Press READY key.
Enter code. Press arming key desired:
(AWAY, STAY, NIGHT-STAY (Internal),
MAXIMUM, INSTANT)
Press #. Press arming key desired:
(AWAY, STAY, MAXIMUM, INSTANT)
Enter code. Press BYPASS key.
Enter zone number(s) to be bypassed
(use 2-digit entries).
Enter code. Press BYPASS key + [#].
Enter code. Press OFF key.
Press OFF key.
Press any key.
Enter code. Press OFF key.
After disarming, enter code again.
Press OFF key again.
∗ R E A D Y
and Press the key pair assigned for fire
at the same time.
#
and #
COMMENTS
View faulted zones when system not
ready.
Arms system in mode selected.
Arms system in mode selected, quickly
and without use of a code.
Bypassed zones are unprotected and will
not cause an alarm if violated.
Bypasses all faulted zones automatically.
Also disarms system. Memory of alarm
remains until cleared.
Memory of Alarm remains until cleared.
Determine cause.
Also silences sounders. Memory of alarm
remains until cleared.
Keypad beeps rapidly on entry if alarm
has occurred while absent. Alarm display
will remain upon disarming until
cleared.
– 25 –