Honeywell ADEMCO LYNX XL Series Installation And Setup Manual page 56

LXL-1010 Installation and Setup Guide
PROMPT
R E P E A T O P T I O N
0 - 4
R A N D O M I Z E
0 = N O 1 = Y E S X
10-2
www.PDF-Zoo.com
VALID ENTRIES
Repeat Option
0 = do not repeat
X
1 = repeat schedule weekly
2 = repeat schedule biweekly
(every other week)
3 = repeat schedule every third
week
4 = repeat schedule every
fourth week
[∗] to continue
Randomize
0 = no
1 = yes
[∗] to continue
firealarmresources.com
EXPLANATION
Enter the desired repeat option for this schedule.
e.g., To make a schedule that happens everyday you would select all
days with a repeat count of 1. To make a schedule that runs for one
week then stops, select everyday with a repeat count of 0.
Note: A schedule will not be active until the next occurrence of the
scheduled start or end time.
If selected, the scheduled start and stop times will vary within 60
minutes of the "hour" time. For example, if a schedule is set to start at
6:15pm, it will do so the first time 6:15pm arrives, but on subsequent
days it will start anytime between 6:00 and 6:59 p.m.
NOTE: Do not use the random option if the start and stop times are
within the same "hour" setting, otherwise unpredictable results may
occur (e.g., the randomized stop time may occur before the start time).