Table of Contents
Advertisement
LXL-1010 Installation and Setup Guide
Refer to the user guide for detailed procedures on adding/deleting security codes and
changing user attributes.
The following is a brief description of how to add user codes.
Keypad Functions
The following is a brief list of system commands. For detailed information concerning system
functions, refer to the User's Manual.
Voice Keypads
The 5828V Voice Keypad provides the following features:
Refer to the User Guide for specific procedures for activating and using these features.
Keypad Commands
Function
Silence Alarms
Quick Arm
Single-Button arming
Alarm Memory
Arming Away
Arming Stay
Arming Night-Stay
Arming Instant
Arming Maximum
12–2
www.PDF-Zoo.com
Adding a User Code:
Deleting a User Code:
Assigning Attributes:
Attributes:
1 =
Authority Level
2 =
Access Group
3 =
not used
4 =
RF Zone No.
5 =
Open/Close Paging
•
Message Center, which lets the user record and playback one message.
•
Voice Status, which can announce system status by using the STATUS key.
•
Voice Chime, which can alert users to the opening of doors/windows while the system
is disarmed.
Description
Pressing any key will silence the keypad sounder for 10 seconds.
Disarming the system will silence both keypad and external
sounders.
If enabled (field ∗21), you can press [#] in place of the system's
security code, plus the desired arming key (Away, Stay, Instant,
Maximum)
If programmed (*57 Function Key menu mode), lettered keys A-D
can be used for arming, using options 3-AWAY, 4-STAY, 5-NIGHT-
STAY, or 6-Step-Arming
If used, no security code is required to arm the system.
When the system is disarmed, any zones that were in an alarm
condition during the armed period will be displayed. To clear this
display, simply repeat the disarm sequence (enter the security code
and press the OFF key) again.
Enter code + AWAY [2] or simply press appropriate lettered key on
the keypads (see "Single-Button Arming" above).
Enter code + STAY [3] or simply press appropriate key on the
keypads (see "Single-Button Arming" above).
Enter code + STAY [3] + STAY [3] or simply press appropriate key
on the keypads (see "Single-Button Arming" above).
Enter code + INSTANT [7].
Enter code + MAXIMUM [4] or simply press appropriate lettered
firealarmresources.com
Master code + [8] + 2-digit user no. + user's code
Master code + [8] + 2-digit user no. + [#] [0]
Master code + [8] + 2-digit user no. + [#] [attribute no.] + value
Values
0-3 (see Authority Level table above)
0-8 (0 = not assigned to a group)
Assigns user number to button type zone for
arm/disarm (keyfob must be enrolled in
system first; see Wireless Key Templates
section).
1 for yes, 0 for no
Advertisement
Table of Contents
